Timberland Pro Helix Work Boot

By Ethan Bickford

Timberland Pro Helix Work Boot Review G&L clothing who provides clothing for all and Big and Tall sent us a pair of Timberland Pro Helix 6” boots to try out. First impression These are some nice looking boots. Made with quality full-grain leather with a waterproof membrane, a non-marking lugged sole. There are lace hooks…

Continue reading »

Child Proofing The Laundry Room

By Robert Robillard

Image: http://www.epa.gov/ Making A Home Safe For Children Many houses these days have laundry rooms on the main floor or bedroom level floors.  These rooms are usually designed to accommodate the washer, dryer, maybe a sink and counter top or ironing area. This post will address child proofing the laundry room. Everything Starts With Proper…

Continue reading »

Poly Classic Columns

By Robert Robillard

Photo: Concord Carpenter. Used poly classic columns. Fiberglass-Reinforced Polymer Columns In the world of residential and commercial remodeling I repair and replace a lot of columns and have recently been leaning ion using Poly Classic columns.  [See:  How To Replace A Porch Column] Decorative house columns have returned to popularity not only for traditional homes…

Continue reading »

Installing A Swinging Door

By Robert Robillard

Swinging Door With Butler Style Hinges I put the final carpentry touches on my new office by installing a swinging door.  the door is a 15-lite clear safety glass door on a “butlers hinge. ” A butler hinge allows the door to swing in both directions and is sprig loaded to swing open and then…

Continue reading »

Senco PC1010N Trim Compressor

By Robert Robillard

Senco PC1010N Lightweight Trim 1-Gallon Compressor The folks at Senco recently improved their PC1010 lightweight and compact trim compressor.  The Senco PC1010N Trim Compressor is now more powerful and simpler to use. The Senco PC1010N is a small 1-gallon oil less air compressor that runs at 1 hp. (peak) .5 hp. (running).  We have the…

Continue reading »

Home Design Trends

By Robert Robillard

photo: concord carpenter Home Construction and Remodeling Trends These past five years have shown certain home design trends.  Consumers desire for less maintenance and more specific use of space. The following are a few of these trends : Increased ceiling heights: Increased heights to 8 or 9 feet on the main floor, and a shift…

Continue reading »

How To Install A Vented Microwave Oven

By Robert Robillard

How To Install A Vented Microwave Oven Under A Cabinet Today’s task was to install a microwave oven under the cabinets and to install a through the side wall vent.    Most of the manufacturer instructions detail specifically how to install a vented microwave oven so make sure to read these instructions and to purchase all of…

Continue reading »

Work Sharp Knife And Tool Sharpener

By Robert Robillard

Work Sharp Knife and Tool Sharpener Ken Onion Edition The folks at Darex, makers of Work Sharp and Drill Doctor, recently sent me their Work Sharp Knife And Tool Sharpener to review and evaluate.  After learning that this tool is mostly built by in the USA by a family owned business in Ashland Oregon  how…

Continue reading »

© Copyright 2019 A Concord Carpenter · All Rights Reserved