How To Remove Window Film

By Robert Robillard on How To

Window Safety Film

Removing Window Film Without Damaging the Glass

As a re-modeler I often use UV film and safety film to protect glass in danger areas, such as stair wells and bathrooms. Many times in a remodel it makes sense to leave an existing, non-tempered glass window  and the safety film is a less expensive alternative to tempered glass.

But what about removing this film later, here are a few steps to ensure you can remove the film without damaging the glass. this technique can be used on residential windows, vehicle tinting or even window stickers and decals.

Window Safety Film

Steps to Remove Window Film and Stickers

1. Start by heating the filmed surface with a hair dryer (a heat gun would be too hot).

2. Lift the film at a corner with your fingernail or a straight-edge razor. Try to peel the film diagonally across the window.

3. With the hair dryer still heating the film, pull it away from the glass surface. If the film has aged, it may come off in small strips.

4. The stripped film will leave an adhesive residue. Fill a quart bottle with a spray nozzle with water and add a teaspoon of baby shampoo.

5. Protect the surrounding area with a drop-cloth. Spray the glass and let it sit for a minute.

6. Spray it again and, using a straight-edge razor, begin scraping off the residue.

7. Keep the surface wet to avoid scratching the glass.

 

 

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Robert Robillard

Carpenter / Remodeler / Editor / Writer / Video Talent

Robert Robillard is a general contractor, carpenter and operates a remodeling company located in Concord, MA. He is the editor of ConcordCarpenter.com and ToolBoxBuzz, and a has a weekly column in the Sunday Boston Globe. Rob is a recognized leader in tool and how-to information for building professionals, he hosts the Concord Carpenter Cable TV Show, offering advice on home repairs and maintenance. On his website, Rob uses his knowledge and experience to help and educate on best practices in the remodeling industry. His motto: “Well done is better than well said!”. Contact Rob at: info@aconcordcarpenter.com

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2017 A Concord Carpenter · All Rights Reserved