Andersen 45 Minute Rapid Install Storm Door System

By Robert Robillard on Energy Saving

The NEW Andersen Storm Door System

I have to say that when I saw the marketing promotion material on the Andersen 45 Minute Rapid Install Storm Door System I was skeptical that any storm door could be installed in such a short time.

The folks at Anderson sent me a door to install and see for myself.  We installed the Anderson door and timed the installation.

Adding a storm door is a good investment regardless of your current doors condition. A well sealed storm door not only saves energy and protects the inner door from the weather but it also allows you to open the inner door to allow light in on cooler or warmer days without worrying about losing too much interior conditioned air.

High-quality storm doors use low-emissivity (Low-E) tempered glazing. Some doors have self-storing pockets for the glass in summer, and an insect screen for the winter. Some have fixed, full length screens and glass panels that slide out of the way for ventilation. Others are half screen and half glass, which slide past each other. Some are removable for cleaning, others are not. All of these features add some convenience and higher costs.

Does the Anderson Install in 45 Minutes?

Yes, I installed the door in just under 45 minutes with seconds to spare.    I have to clarify this by stating that this time does not include setting up or cleaning up or tools, cardboard boxes, removing the old storm door, etc.  Just the door installation.

I really was impressed with the ease of installation.  As a carpenter I have installed dozens of storms doors mostly from manufacturers like Anderson and Larson.  The Andersen storm doors with the 45-minute Rapid Install System is by far the fastest and easiest door I have installed.

I attribute the fast install to an innovative design package.  The entire door jamb and mortise lock are already installed, as is the bottom sweep and drip cap.  Many of the holes needed are pre drilled and the latch is integrated into the door jamb eliminating the need to add and align a strike plate.

There was not cutting and no measuring during the install with exception of double checking the door closer location.  Probably the two coolest things I saw on this new product was that the handle set twists and locks securely in place without the use of set screws or tools – another time saver.   And Anderson uses a spacer temporary and removable clip at the bottom of the door to install and set the door bottom reveal perfectly – ingenious!

Features of the 45-Minute Rapid Install System:

  • Quality finish on door and hardware
  • Well designed and functioning fram and door assembly
  • Fast and easy installation
  • No cutting and virtually no measuring
  • Basic tools needed.

Anderson Styles Available:

The new installation system is available in the Contemporary Series Interchangeable Fullview and Contemporary Series Single Vent storm doors.

The Anderson Rapid Install system is available in multiple sizes, eight colors, three hardware finishes and a variety of clear or decorative glass options.

The Rapid Install system for storm doors is available at authorized Andersen dealer locations found in the Dealer Locator at www.stormdoorcentral.com and also at select Home Depot stores.

 

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Carpenter / Remodeler / Editor

Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzz As a General Contractor and carpenter, Rob owns and operates Concord Carpenter LLC. A full-service remodeling and construction company. Rob is a recognized leader in home building best practices and a source for how-to information for building professionals. On this website, Rob covers all aspects of home construction, building science, home improvement, woodworking, remodeling, and some of the best product and tool reviews. Rob is in charge of our Tool and Product Review series - Concord Carpenter Videos where we post all of our tool reviews and video tutorials. Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Craftsmanship, quality, and pride guide his journey on this channel The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2019 A Concord Carpenter · All Rights Reserved