New DELTA 6-Inch and 8-Inch Bench Grinders

By Robert Robillard on Uncategorized

New DELTA 6-Inch and 8-Inch Bench GrindersDelta Bench Grinders: 8-inch, Model 23-199 and 6-inch, Model 23-198

DELTA®Power Equipment Corporation recently introduced two more new products to their lineup including an 8-inch, Model 23-199 and a 6-inch, Model 23-198 Bench Grinders. Details include cast iron bases and powerful 2-1/2 and 5.0 HP motors. These are clearly built for long life and regular shop use.

6-Inch Model 23-198 Specifications

  • Motor: 2 1/2 AMP, 120 Volt, 1 Phase
  • Shaft Diameter: 1/2 in.
  • Wheel Dimensions: 6 in. Diameter x 3/4 in. Thick
  • Wheel Speed: 2,000 to 3,400 RPM
  • Wheel Grit: 36 Grit Coarse and 60 Grit Friable
  • Cord Length: 6 feet
  • Assembled Depth: 11 in.
  • Assembled Width: 14 1/2 in.
  • Assembled Height (not including light): 11 in.
  • Base Dimensions: 7 in. Depth x 9 in. Width
  • Tool Weight: 27.5 lbs. (Net); 31.9 lbs. (Gross)

8-Inch Model 23-199 Specifications

  • Motor: 5 AMP, 120 Volt, 1 Phase
  • Shaft Diameter: 5/8 in.
  • Wheel Dimensions: 8 in. Diameter x 1 in. Thick
  • Wheel Speed: 2,000 to 3,400 RPM
  • Wheel Grit: 36 Grit Coarse and 60 Grit Friable
  • Cord Length: 6 feet
  • Assembled Depth: 11 in.
  • Assembled Width: 16 1/2 in.
  • Assembled Height (not including light): 12 1/2 in.
  • Base Dimensions: 7 1/2 in. Depth x 9 3/4 in. Width
  • Tool Weight: 41.1 lbs. (Net); 45.5 lbs. (Gross)

For More Information Check Out The Formal Press Release Below

Anderson, SC, September 2012 – DELTA®Power Equipment Corporation, a designer and manufacturer of stationary and benchtop woodworking machinery and equipment, has introduced two new bench grinders, an 8-inch, Model 23-199 and a 6-inch, Model 23-198, which make quick work of all grinding, sharpening, polishing and buffing operations.

Both DELTA® bench grinders feature patented tool-less quick change nut and tool-less wheel cover that make changing wheels fast and easy. They also feature variable speeds with an upfront speed dial allowing for easy control of speeds from 2,000 RPM to 3,400 RPM, which offers an excellent level of control no matter what material the user is working with.

They also feature a cast iron base for durability and reduced vibration during operation and come with four rubber feet to help prevent movement. The full-size clear safety shields have thumb screws for easy adjustment.

Both come with a 36-grit coarse wheel for grinding and a 60-grit friable wheel for sharpening, and a diamond wheel dresser. The white sharpening wheel is used for sharpening tools and chisels. Its tool rest has a drill bit rest milled into the surface so the user will get the correct angle on the tip at all times. The two-piece tool rests are independently adjustable to minimize wheel wear and to provide a variety of angles for the user.

Each has a worklight (40-watt bulb not included) with separate on/off switch and flexible goose neck, providing illumination during set up and while grinding or sharpening, buffing or polishing.

The new  DELTA® 6-inch Bench Grinder has a 2-1/2 Amp induction motor for long lasting performance. The 8-inch Bench Grinder features a 5-Amp induction motor to handle the toughest tasks.

The new DELTA® 6-inch and 8-inch Bench Grinders come with a Five-Year Warranty and are available at woodworking distributors and retailers. The suggested retail price for the 6-inch Bench Grinder, Model 23-198 is $124.99; the suggested retail price for the 8-inch Bench Grinder, Model 23-199 is $169.99. For more information, customers can visit www.DeltaMachinery.com or write to customercare@dpec-na.com.

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Carpenter / Remodeler / Editor

Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzz As a General Contractor and carpenter, Rob owns and operates Concord Carpenter LLC. A full-service remodeling and construction company. Rob is a recognized leader in home building best practices and a source for how-to information for building professionals. On this website, Rob covers all aspects of home construction, building science, home improvement, woodworking, remodeling, and some of the best product and tool reviews. Rob is in charge of our Tool and Product Review series - Concord Carpenter Videos where we post all of our tool reviews and video tutorials. Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Craftsmanship, quality, and pride guide his journey on this channel The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2019 A Concord Carpenter · All Rights Reserved