Rockwell VersaCut Circular Saw – Model RK3440K

By Scott Arnold

Rockwell VersaCut Circular Saw – Model RK3440K Review The Rockwell VersaCut is a compact circular saw which allows you to a variety of materials such as cement board, wood, hardwood flooring, plastic, ceramic tiles, slate, aluminum and even sheet metal. The VersaCut is a lightweight, compact mini circular saw the provides a balanced design that is ideal for several cuts.…

Continue reading »

SKILSAW SIDEWINDER 7-1/4 in. Circular Saw SPT 67 WL-01

By Robert Robillard

SKILSAW Sidwinder 7-1/4 in. Circular Saw Review Early in my carpentry career I own two power saws: a circular saw and a reciprocating saw. Much later as my two tool arsenal grew, and I became more experienced, I ended up buying a table saw, jigsaw, routers and all kinds of other tools. Back then circular…

Continue reading »

M12 FUEL 5-3/8” Circular Saw 2530-20

By Robert Robillard

M12 FUEL 5-3/8” Brushless Circular Saw 2530-20 Review Milwaukee Tool recently expanded their 12-volt line with their release of the M12 FUEL 5-3/8” Circular Saw 2530-20. What intrigued us at Concord Carpenter was the size, weight and ability of this new saw.  We first saw it at Milwaukee’s media event,and its easy to see why…

Continue reading »

RIDGID 10 Inch Portable Table Saw with Stand R45101

By Ben Carmichael

RIDGID 10 Inch Portable Table Saw with Stand R45101 – Tool Review Note: This is a review for the R45101 table saw, not the R4513 saw, which look nearly identical and are often confused for each other. For more clarity on the differences between them, please see this Ridgid forum discussion. As anyone who works…

Continue reading »

DEWALT Festool and Makita Track Saw Head to Head

By Phil Benevides

This article was written by Phil Benevides and Ethan Bickford Track Saw Comparison Results Here at A Concord Carpenter we took a hard look at the major Track Saw models on the market to see how they “lined up”. With hours in the shop and critical analysis of each saw’s features and performance we are providing…

Continue reading »

Bosch CM10GD Dual Bevel Glide Miter

By Robert Robillard

  Bosch Axial-Glide 10-inch Dual Bevel Glide Miter Saw CM10GD If your workshop is similar to mine you have a lot of dead space, tons of free walls and lots of free area on the open floor, right? Well not exactly, my shop is cramped, crammed and real tight. I recently had the opportunity to…

Continue reading »

Milwaukee M18 FUEL Sawzall 2720-22 Tool Giveaway

By Robert Robillard

Milwaukee Sawzall Newsletter Subscriber  Giveaway The folks at Milwaukee Tool recently introduced their new Milwaukee Cordless M18 FUEL Sawzall 2720-22 that actually has the power to compete with a corded reciprocating saw. Cutting the cord is a goal for the engineers and Product Managers at Milwaukee and to show the readers of Concord Carpenter their…

Continue reading »

Milwaukee Cordless M18 FUEL Sawzall 2720-22

By Robert Robillard

Milwaukee Cordless M18 FUEL Brush-less Reciprocating  Saw  The folks at Milwaukee Tool recently introduced their new Milwaukee Cordless M18 FUEL Sawzall 2720-22 that actually has the power to compete with a corded reciprocating saw.   I know this because I used it with an XC4.0 Ah battery and tested it against a corded reciprocating saw…

Continue reading »

© Copyright 2019 A Concord Carpenter · All Rights Reserved