Paulk Workbench Review

By Robert Robillard on Tool and Product Reviews, Workshop tips


Solution for A Small Shop

I recently took the Paulk Workbench from FastCap into my shop to review and evaluate. The Paulk Workbench is an innovative workbench system with a torsion box-like design. The result of this design is that it is strong, versatile and flexible workshop solution. The Paulk Workbench top measures 3’x6’x10”, completely assembled, and also has two adjustable support saw horses.


Paulk workbench Applications

At first glance I can see this system useful in the following applications.

  • Job-site assembly table
  • Workshop bench
  • Router table
  • Out-feed table
  • Clamping table
  • Assembly table
  • Assembly platform
  • Home, shop or garage storage system

Workshop Benches and Tables

If you’re like me, you’ve probably built most of the tables and benches in your shop. If you’ve had your workshop for at least 20-years, I’m betting that those workbenches and tables have seen many modifications. To me it’s a simple, but often hard to achieve, quest to be more efficient and organized and efficient.  When I do achieve those two goals, I tend to me more effective and productive on my projects. Time is money, and more time on task, and less time setting up or searching for tools, means the project is completed in a timely fashion.

Workshop Assembly and Out-feed Table

My old assembly table setup was inefficient. It was a simple table top and lower shelf. I had a wood vise mounted on one side and a 16” out-feed roller on the other side, doubling as an out-feed table.

Paulk Workbench Applications

The Paulk Workbench offers a flat stable surface; it allows you to work efficiently while having all your tools just below the work surface on a lower side opening, shelf section. It is constructed out strong multi-laminated birch plywood this bench will last a longtime. If the ¾” top becomes damaged you simply unscrew it and replace it, or add another layer on top.

In my shop, my old assembly table height was 35-inches which used to be the height of my old Grizzly table saw. After that saw broke I started using the RIDGID saw as a temporary saw until I could afford a Delta Unisaw.  To make this work, I added an out-feed roller to the assembly table. For my shop, I wanted the Paulk Workbench to double as an assembly table and an out-feed table. To do this, I adjusted the sawhorse straps to 37”, which matched my 10-inch ridged table saw.

Adjustability and Flexibility

One thing I really like about the Paulk Workbench is its flexibility. I am able to use this as an assembly table and out-feed table but I also can enjoy the following flexible applications:

  • The 20 mm, 4-inches on center holes on the tabletop allow me to use surface clamps, making it a clamping station.
  • The lower 6-inch side openings, allow me to store, out of the way, and easily reach my most-used tools
  • The wood frame allows me to mount electrical boxes, battery chargers or hand tools onto it, as well as make modifications. For example, I mounted a switch powered outlet to power and control my 3 h.p inset router.

  • The adjustable sawhorses accommodate different height table saws and power tool heights.
  • The drop-in router insert allows me to replace my stand-alone router table, freeing up valuable shop floor space.
  • The table has pre-routed groves allow for a table saw miter gauge to extend into, as well as an inset track or miter gauge groove for the router drop-in.
  • The table can be transported to a long-term job-site
  • The 60 lb. table top can be removed, and easily stores along a wall or other section of the shop to free up floor space for large assembly projects, like a bookcase.
  • The table-top can be placed on the floor as an “assembly platform,” for larger, shorter projects, eliminating the need to bend down to floor level.
  • The integrated sawhorses store easily inside the tabletop side openings, creating less of a shop footprint.
  • The cantilevered side shelves allow me to temporary store long rips, or my track saw track safely.

Paulk Workbench Weight

The Paulk Workbench tabletop weighs about 60-pounds. I’m a mobile contractor, and I do not see myself using this on my day to day jobs. I would consider setting this up ion a project that was going to last awhile. A project like and interior trim job, or building onsite mantles and bookshelves.

Improvement

If you plan on using this workbench outside you want to keep it dry. Birch plywood does not like getting wet and the veneer will deteriorate over time. One improvement would be to use Marine grade plywood.

Paulk Workbench Cost

Fastcap sells the Paulk Workbench in three configurations:

  1. $630 Completely assembled table and sawhorses
  2. $530 Completely assembled tabletop
  3. $330 Tabletop [NOT] assembled [flat stock]

If you are having this item delivered, shipping does add up, and the UPS delivery company will only do a tailgate drop.

If cost is too much, you can always order the plans and make it yourself. I do caution you to evaluate how much time and effort is required.

I figure it would take me a day and a half to make this table assembly. When you calculate my hourly rate, plus the materials needed and the time needed to build it, it’s cheaper to purchase the Paulk Workbench.

Final Thoughts

I started out thinking that I was going to simply write a review on this table and move on. I was impressed with the quality and flexible features of this table that it is going to become my new assembly / out-feed table for my shop.

The process of organizing your workshop varies wildly depending on how you use your shop. Efficiency and organization is a process that is constantly being tweaked, overhauled. This process can take months or years to fine-tune. Especially as we learn what works and what doesn’t work in terms of operation, storage and features.

My theory on the cost of the Paulk Workbench, is you get what you pay for. This table will improve efficiency and organization, in your shop.

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Carpenter / Remodeler / Editor

Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzz As a General Contractor and carpenter, Rob owns and operates Concord Carpenter LLC. A full-service remodeling and construction company. Rob is a recognized leader in home building best practices and a source for how-to information for building professionals. On this website, Rob covers all aspects of home construction, building science, home improvement, woodworking, remodeling, and some of the best product and tool reviews. Rob is in charge of our Tool and Product Review series - Concord Carpenter Videos where we post all of our tool reviews and video tutorials. Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Craftsmanship, quality, and pride guide his journey on this channel The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2019 A Concord Carpenter · All Rights Reserved