Keeping Building Materials Out Of The Land Fill
When you’re a carpenter you get all sorts of questions and requests for
A good friend asked if I would help her remove some of the newer windows and doors from her house, already slated for demolition. She and her husband wanted to donate the items to the Habitat for
Story Behind the Story
They plan on saving the existing foundation and building a updated, more energy efficient, better constructed home for their family.
When I met to go over the salvage mission with my friend she was emotional, explaining that they have 11 years of family memories in the house and could not justify destroying parts of the home that were in great shape and could be used by someone else.
She told me she had first heard of Habitat for Humanity when her husband had worked a few days on a building a house as part of a team-building effort his employer organized. He shared his excitement with her and had always thought about volunteering again for Habitat for Humanity.
While researching a place to donate her building materials to she came across the Habitat for Humanity ReStore website and wanted to work with them.
What is Habitat for Humanity?
Habitat for Humanity is a charitable nonprofit organization dedicated to building simple low-cost homes by forming partnerships with low-income families in need of decent and affordable housing.
Families are selected based on their level of need, willingness to work, acceptance of responsibilities and ability to pay a mortgage. Families must complete at least 300 hours of sweat equity and an additional 100 hours of homeowner education classes. Qualified families purchase Habitat homes with zero-interest mortgages, enabling them to own their home.
What is a Habitat for Humanity ReStore?
Habitat for Humanity and the ReStore are actually one in the same organization.
All materials are donated by local retail businesses, building contractors, suppliers and individuals. The Habitat ReStore sells new and used items to the public at a fraction of the retail price, typically 50% to 90% off.
The proceeds benefit Habitat’s mission to build affordable homes and help low-income families acquire them. All donations are tax deductible, and proceeds go back to the local Habitat for Humanity affiliate to build houses for families in the local community.
Habitat for Humanity and the Habitat ReStore rely heavily on corporate sponsors, donors and volunteers. What I liked most about the Habitat ReStore is that it gets folks who might not usually be interested in volunteering on a construction site to become involved in the process.
The Habitat ReStore is also a “green” process in that it’s an environmentally and socially responsible way to keep good, reusable building materials out of landfills.
The Habitat ReStore is operated by a local Habitat for Humanity affiliate and each one is unique. Most Habitat ReStores focus on home improvement goods like furniture, home accessories, building materials and appliances.
A home’s shelter is a basic need for all people and I was sold on the idea. I spoke immediately to my carpentry crew to see if they’d help me salvage items from the house prior to demolition day. They agreed that this was a worthy use of time and we scheduled the salvage detail for that Saturday.
The homeowner received pre-approval for the items to be donated and then marked all of the items with blue tape to make identification easier for me and my crew.
We arrived at 7:00 a.m. and had to have everything removed by 10:00 am when the Restore truck was scheduled to arrive.
In order to run our reciprocating saws we had to run two hundred feet of 12 guage extension cords. The house power was disconnected and the jobsite temporary power was not live yet.
Removing the Windows
While we’ve installed plenty of new windows but don’t really remove them so this was an exercise in reverse for us. First we removed all of the interior trim and window sills before taking off the exterior clapboard siding immediately surrounding the window.
Once the siding was removed we were able to expose the window nailing flange which was fastened approximately every 4 to 6 inches with roofing nails.
Careful use of a cat’s paw or nail puller was used to remove the “roofers.”
After that it was simply a matter of tilting the window out of its opening and carrying it to the garage, our designated transfer location.
Removing Exterior Doors
Upon closer inspection one of the exterior doors, a Simpson brand 15-lite door, had damage to its oak threshold so we made a decision to remove and salvage the door slab and hardware and leave the door jamb behind.
This Simpson door had a nice brass Baldwin knob and hinges set so we removed the hinges from the door jamb but left them attached to the door for safe keeping. We took the hinge screws and strike plates, placed them into a plastic baggie and taped them to the door.
The front exterior door was protected by a porch roof and was in fantastic shape so we removed the door and jamb keeping them together as a unit.
All three hinge pins are removed and then the door is then removed and set aside.
We used trim pry bars to remove the interior and exterior trim to expose the door jamb shims. Once exposed we used a reciprocating saw to cut the nails and then tilt out the door jamb from the framing.
Removing Interior Doors
Removing an interior door was similar to the exterior door was easier to remove as was installed with only a few finish nails.
The first step was to remove the door from the hinges, then all of the trim, both sides. Some carpenters do not used shims or install finish nails through the door jamb and you’ll find that out at this stage.
We prepared all of the interior doors similar to the exterior door by installing a finish nail through the jamb and into the door to temporarily and securely hold it inside the door jamb.
Prepping the Doors for Transport
With the door and door jamb removed from the framing we prepared it for transport. The door was placed back into its jamb and the hinge pins were reinstalled.
A helper then held the door in the frame to prevent sagging and we then installed one finish nail through the jamb and into the door, leaving the head of the nail exposed for easy removal.
Securing the door this way allows the door and its jamb to be transported and stored as one unit and also prevents the delicate three piece jamb from sustaining twisting damage.
Removing the Slider
Removing the slider for reuse was like installing it in reverse. First the top retaining strip was removed so the moving doors could be lifted off the tracks and removed.
After the moving doors were removed the next step was to unscrew the fixed panel’s top “L” bracket and the four to five screws in the bottom of the threshold. Once all of the fasteners were removed the fixed panel then slid toward the center and then tilted and lifted out.
Jamb screws were removed next, usually three to four on the side jambs and then three to four along the top jamb.
To remove the slider’s jamb we needed to expose the nailing flanges by removing the exterior clapboard siding / trim and any roofing nails in the slider flange.
The last step was to tilt the slider jamb and attached threshold out of the framing. We attached two diagonal braces to the opposite top and lower corners to keep the jamb from bending and damage.
Removing the Mantel
Most mantels that I have installed or removed were fastened with finish nails. This mantel was no different. Using two pry bars I worked my way down the mantel shelf and legs prying the finish nails loose.
Once a space large enough for my hand was created I simply pulled the mantel off the wall.
We used end cutters to pull the finish nails out of the mantel from the rear to avoid damaging the mantel face.
The water in the house was turned off. We removed four Kholer sinks with attached faucet.
The drain at the P trap and the water lines were disconnected and then we focused on the caulking at the counter top.
We found that the best way to loosen this caulking was with a multi-tool and a scraper blade. The multi tool easily cut the old caulking allowing us to easily lift the sinks out of the counter hole.
Power Tools Overheating
TIP: Using a super long extension cord we paid close attention to the tools’ temperature and any burning odor. Overheating means that your motor is working too hard and a drop in current can result in motor damage.
When a tool does not receive enough voltage to the motor, the motor may overheat. Overheating can lead to irreversible damage to the motor. Long extension cords gradually lose their ability to supply voltage. This loss can lead to overheating in tools so you need to use a shorter connection to the power supply if possible.
If you must use a long extension cord, use the thickest, lowest gauge extension cord you can find. We used 12-gauge cords and had no problems.
Great Stuff, Great Price, Great Cause
Working to salvage items from this house was a very positive experience for all of us. And time well spent.
Volunteering makes a meaningful, positive impact on my community and the wellbeing of individual families. What better way is there to connect with your community and give something back.
This is a great way to make that little corner of the world where you live just that little bit better.
Whether you’re looking for a convenient place to donate, a rewarding place to volunteer, or a great deal on that one-of-a-kind item, check out your local Habitat ReStore.
Robert Robillard is a remodeling contractor based in Concord, MA. He is also the editor of a www.AConcordCarpenter.com Visit his website to learn practical solutions to your home improvement problems
The Process of Donating
The Habitat ReStore requires that all donations must be pre-approved and all of the items donated are valued and tax-deductable.
Donation Items Accepted:
- Appliances – no older than 10 years
- Dishwashers (no older than 5 yrs)
- Range Tops
- Microwaves (no older than 5 yrs)
- Washing Machines
- Range Hoods
- Small appliances (i.e. toasters, blenders, etc.)
- Kitchen Cabinets
- Bathroom Cabinets
- Countertops – only with cabinets, unless they are granite countertops
- Cabinet knobs
- Door knobs/deadbolts
- Electrical Hardware
- Plumbing Hardware
Lighting (must work!)
- Hanging Chandeliers
- Floor/Table Lamps
- Lamp shades in good condition
- Track Lighting
- Ceiling Fans
- Tables (dining room, side)
- Dining room set (may include upholstered chairs)
- Coffee/End Tables
- Entertainment Centers
- Filing cabinets
- No upholstered furniture
Building Materials (preferably new)
- Unused Lumber
- Tile (no broken pieces)
- Linoleum (new only)
- Carpet (new or gently used, minimum room size, no small pieces except carpet tiles)
- Area rugs (new or gently used)
Windows / Doors
- Double Hung
- All windows must be aluminum clad or vinyl replacement only.
- Game tables
- Jet skis
To donate your old vehicle, call 1-877-277-4344, or visit the Cars for Homes Website.
Items NOT accepted:
- Mattresses/Box Springs
- Baby Items
- Anything that doesn’t work/needs a replacement part
- Hazardous Materials/Chemicals
- Shower Doors
- Unframed mirrors or glass
- Appliances over 10 years old
- Microwaves & dishwashers over 5 years old
- Storm windows/single pane windows
- Computers/fax machines/copy machines
- Swing sets or playground equipment
- Garage Doors
- Hot Tubs
Corporate donations of materials
Would your company like to donate a large quantity of building materials, furniture, appliances or other items to Habitat for Humanity? Email Habitat’s Gifts in Kind team at email@example.com.