Fireplace Mantle Makeover
Step 2: Choosing an Electric Insert
This was a step we left up to the client. There are so many different styles and models it should be decided on by the client. What we did for the client was measure the current opening and let them know what the maximum dimensions were. Anything smaller than these measurements would require us to frame the opening. The client went with a Dimplex 25” Contemporary Fireplace Insert which required us to frame out the opening.
The framing was recessed 7/8″ to accommodate the cement board we were installing. The frame was secured into the brick, using 2-1/2″ Tapcon screws, on the top sides and bottom. The frame measurements were 24″W x 18-3/4″H x 7-7/8″D.
If you enjoyed this post, make sure you subscribe to my RSS feed!
