How To Fix A Wobbly HandRail

By Robert Robillard on Home Repairs And Remodeling


Adding a Handrail Support To Fix A  Wobbly Handrail

Image: allposters।com

I get many calls for loose handrails. Often times the least invasive and most cost effective solution is achieved by adding a handrail support in the middle span of the railing. This article will address how to fix a wobbly handrail.

Support The Middle Span

The reason for this is that many times the middle section is unsupported and weight applied to that area of handrail causes extra stress on the end brackets which in turn causes them to loosen or even dislodge from the wall.

Adding a handrail support  support stiffens the mid rail section and spreads out the weight evenly to all the handrail brackets. If done correctly it should not negatively affect the aesthetics of the railing system.

Customization

The reason why many railings do not have a mid span bracket is because the wall is too far away and the brackets don’t reach the wall.  That was the case in the photo below.

Use A Spacer Block

To avoid having to purchase or make a longer, “custom”  handrail bracket you can simple add a spacer block to the wall.  The spacer block should extend far enough to make a standard railing bracket work.

In this situation I made a decorative bracket from left over, 1 x 3″ oak strip, flooring in this house. I glued three pieces of the flooring together and then ripped it down to the thickness that allowed the handrail bracket to fit under the railing. [last photo]

For aesthetic reasons I added a “V” groove down the seam of a glue joint and routed a Roman Ogee detail on the outer edge.

Securing the Support Block

For this to work properly you will need to secure this support block to framing.   Use 3-inch long screws or 16 penny finish nails and fasten the block into the stairway framing.

On interior walls you will need to find a wall stud to do this.   This may mean that your mid span block is not 100 percent centered,  if you’re alright with this positioning then go for it. If being off-center bothers you then consider adding a second bracket to take one’s eye off the center location.  If the center location is your choice then  add blocking in the wall cavity to support your bracket.

Adding Blocking

If no wall studs are available to securely fasten your support block or handrail bracket to, you may need to cut the wallboard open to add blocking. Add framing blocking between two adjacent wall studs in order to get solid and secure fastening.

Conclusion

In most situations adding a handrail support will solve the problem.  You may need to reattach the other brackets, use longer screws, add blocking or a simply tighten everything up.
The end result was immediately noticeable and resulted in a handrail that was stiffer than the day it was installed.

How To Repair a Wobbly Handrail – Video

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Carpenter / Remodeler / Editor

Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzz As a General Contractor and carpenter, Rob owns and operates Concord Carpenter LLC. A full-service remodeling and construction company. Rob is a recognized leader in home building best practices and a source for how-to information for building professionals. On this website, Rob covers all aspects of home construction, building science, home improvement, woodworking, remodeling, and some of the best product and tool reviews. Rob is in charge of our Tool and Product Review series - Concord Carpenter Videos where we post all of our tool reviews and video tutorials. Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Craftsmanship, quality, and pride guide his journey on this channel The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2019 A Concord Carpenter · All Rights Reserved