Paslode CF325LI Cordless Framing Nailer

By Robert Robillard on Tool Reviews

Paslode CF325Li  Lithium-ion 30 Degree Cordless Framing Nailer Review:

I’ve been using Paslode pneumatic and cordless nailers for at least two years and have been very happy with their performance.  Recently Paslode sent me the Paslode CF325LI Cordless Framing Nailer and asked me my thought on it’s  performance as compared to the older cordless NiCad version that I have.

What’s The difference?

According to Paslode the CF325Li cordless nailer drives 50 percent more nails per charge (up to 6,000) Thats 2,000 more nails per charge than the Ni-Cad version. The lithium-ion battery also holds its charge five times [5X] longer than the earlier Ni-Cad version.

One amazing new feature that the lithium-ion nailer has is a two-minute quick charge that will drive up to 200 nails.  That’s huge when you’re in the middle of and need to finish up a project but don’t have the time to wait one hour to completely charge the battery.

Oh yeah and did I mention that the new CF325Li is lighter?

It’s 7.25 pounds versus the NiCad which is 7.50 pounds, a small amount but I’ll take anything I can get to get to reduce arm and shoulder fatigue.    It also features a new depth-of-drive adjustment that adjusts without tools. The depth of drive adjustment was redesigned  and is now MUCH easier to change and adjust.

Features:

NEW depth of drive adjustment

  • Weighs 7.25 pounds with the battery in it
  • Drives 6000 nails per charge
  • Drives  2″ to 3- 1/4″ strip nails(available only with  Fuel + Nail Combo Packs)
  • Drives approximately 1200 nails per fuel cell charge
  • Dimensions: 4″ x 14.5″ x 12″
  • Rafter /belt hook
  • Non-slip handle grip
  • NEW tool-less depth of drive nail adjustment
  • Nail lockout feature prevents blank driving
  • Needs to be cleaned at 50,000 nails driven

First Impression:

Battery standby position

The new Paslode CF325LI Cordless Framing Nailer looks exactly the same with one exception. 

The battery has a standby tab [on /off tab] that allows you to slightly back out the battery to disengage it from the tools contacts. 

This is a nice feature because like many other cordless nailer owners I always remove the battery to prevent the tool from from drawing off the battery when not in use.  [Similar idea to eliminating Phantom electrical loads]

This nailer is incredibly well balanced and precise.  It’s compact size allows it to just fit between 16″ o.c. studs, joists or rafters which I recently appreciated when installing joist blocking.

The trigger and new depth of drive switch are easily manipulated with gloves on and work well. The CF325Li fired every time for me and it was pretty cold outside.   As fast as I could set up and pull the trigger the nailer fired.   

I’m not a fan of bump firing and do not have my pneumatic nailers set up to do so, so I’m not going to debate the two as far as safety, speed or accuracy goes.  Suffice to say that  the CF325Li can place a nail as fast as you can push /set the nailers nose trigger and pull the trigger.  For a skilled user that equates 2 to 3 nails per second.

Using The CF325Li Cordless Nailer:

 

Overall Impression:

I loved my Paslode Ni-Cad version and this newer version blows it out of the water.   As far as  cordless nailer technology goes Paslode has upped the ante.

If your tired of setting up, dragging and tripping over pneumatic hoses then I suggest you become a cordless convert. I am ! check out the Paslode CF325LI Cordless Framing Nailer.

How Much and Where to Buy?

The Paslode CF325Li Cordless Framiang Nailer can be purchased online for $369.00 here: PasLode-CF-325LI-Li-Ion-Cordless-Framing

 

This review contains my opinion of a product. I take pride in providing my readers with honest and objective information as well as a practical approach to using a product. I never accept payment in exchange for a positive review. Many of the tools and products are provided to for free by a manufacturer for review.

If you enjoyed this post, make sure you subscribe to my RSS feed!

About the author

Robert Robillard

Carpenter / Remodeler / Editor

Rob Robillard is “The Concord Carpenter” Rob is a builder, general contractor, carpenter, woodworker, and editor of Concord Carpenter and ToolBoxBuzz As a General Contractor and carpenter, Rob owns and operates Concord Carpenter LLC. A full-service remodeling and construction company. Rob is a recognized leader in home building best practices and a source for how-to information for building professionals. On this website, Rob covers all aspects of home construction, building science, home improvement, woodworking, remodeling, and some of the best product and tool reviews. Rob is in charge of our Tool and Product Review series - Concord Carpenter Videos where we post all of our tool reviews and video tutorials. Rob approaches remodeling and building construction with a pragmatic and problem-solving approach. He enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the construction and remodeling industry. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. #BeAMentor #Green2Great Craftsmanship, quality, and pride guide his journey on this channel The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

All posts by Robert »

Not what you're looking for?

Search for more articles here. Enter keywords like roof leak, bookcase, deck, etc to find your topic.

© Copyright 2019 A Concord Carpenter · All Rights Reserved